Info
︎︎︎Press, Awards, Events
Projects
Risograph
Shop
🧒🏻👦🏼 is a design studio 🔎️ that explores a diverse array of graphics, prints 📁, risograph 🔮️ and visual experiments.
Besides RISOGRAPH printing, we also provide various additional processing services. For the prices of post-printing processing, please refer to the description below. Feel free to contact us to discuss more processing ideas for your project.
除了孔版印刷外,工作室有提供許多後加工的服務項目。完整的加工項目如下,若有以下任何的後加工需求,請來信時一起備註告訴我們,若下方沒有提供您需要的加工項目,也歡迎來信告知討論。
Trimming
裁切
Trimming service is priced by the number of “units” (one unit means one size). Regardless of how large the trimmed size is and how many copies of them, as long as they are of the same size, it is considered as one unit.
Trimming price: 250 NTD per unit (If the trimmed size is smaller than 70*70mm, an additional 100 NTD will be charged.)
Trimming price: 250 NTD per unit (If the trimmed size is smaller than 70*70mm, an additional 100 NTD will be charged.)
裁切費用以「式」為單位做計算, 一「式」為「一種尺寸」的意思 , 無論裁切後尺寸多大、數量多少張,只要是同一種尺寸,都以一式做計算。
裁切費用:一式 / 250NTD (若裁切後的完成尺寸小於70*70mm,則需加收100NTD)
裁切費用:一式 / 250NTD (若裁切後的完成尺寸小於70*70mm,則需加收100NTD)
︎︎︎ The above examples are both priced as “one unit.”
上面兩張範例圖,皆以「一式」做計算
上面兩張範例圖,皆以「一式」做計算
︎︎︎ The figure on the left will be priced as “two units,” and the figure on the right will be priced as “three units.”
上面兩張範例圖,左圖以「兩式」做計算,右圖以「三式」做計算
上面兩張範例圖,左圖以「兩式」做計算,右圖以「三式」做計算
Rounded
紙邊導圓角
Rounded corner cutting service provides three radius sizes: 3.5, 5, and 7.5 (mm).
紙邊導圓角的常規尺寸有三種,如下方所式R = 圓的半徑(mm)
Binding
裝訂
We provide several binding methods, including perfect binding, saddle stitching, sewn binding, loop stitching, and so on.
If more than 100 copies are requested, it will take extra 1-2 working days for quotation, depending on the complexity of the binding methods.
If more than 100 copies are requested, it will take extra 1-2 working days for quotation, depending on the complexity of the binding methods.
提供的裝訂方式有非常多種,像是基本的騎馬釘、車線、一般膠裝、歐姆釘…等。
若裝訂數量超過100本,根據裝訂工法的複雜度,需增加1-2天報價工作天。
若裝訂數量超過100本,根據裝訂工法的複雜度,需增加1-2天報價工作天。
Coating, Die Cuttting,
Foil Stamping,
軋型, 燙金, 上光
For special post-printing processing, please inquire by Email in advance. It will take extra 1-2 working days for quotation, depending on the areas and complexity of the processing methods.
特殊加工請事先透過Email詢問,加工部份會依加工面積、加工複雜度需另外多1-2個報價工作天。